With its elegant and modern form this stunning copper floor lamp is sure to add a contemporary accent to any space.
The clever design from Kopper Kreation incorporates a dimmer switch which unlocks the true potential of the exposed Edison bulb of which there are 3 options available. It can be dimmed from a low to high setting with ease which gives the lamp real functionality meaning it can be used in a multitude of settings for style or function.
It also has a floor switch so once the required setting is achieved it can be turned on and off with the floor switch. It is a delicate lamp and very much a design piece to be admired as a room feature.
This design is a clever reuse of old gas copper pipe. This beautiful copper pipe lamp has been bent by hand from one 3m piece of recycled plumbing pipe. The copper is hand polished to a natural finish that will age and develop character over time.
This lamp was designed around the exposed Edison bulb and the design was developed to accentuate their beauty. This floor lamp will not only lighten up your space with a delicate and ambient tone but will also add a quirky and artistic note.
Specification
10mm reclaimed copper pipe. As it is handmade the dimensions may vary slightly but never more than a few mm! There are 3 bulbs to choose from.
Measurements:
350mm wide
1500mm high
350mm deep
Electrical:
All components are CE certified
0.75mm2 black twisted braided 3 core cable
Inline dimmer switch 220-240V
Copper effect lamp holder c/w cord grip
125mm E27 Vintage Edison Bulb (3 Options)
UK 3 pin plug c/w 3 amp fuse
Inline on/off floor switch
Fully earthed and electrically tested
Care Instructions
All materials used are recycled or salvaged where possible. No lacquer or covering is used. The material is polished to a natural finish by hand and the products are designed to age over time.
Over time copper naturally changes colour. Transforming from a shiney brown/red colour to darker browns, then blues and finally greens after a number of years. When exposed to the natural elements copper develops this ‘patina’ which actually protects and preserves the metal underneath.
If you wish to clean the copper, we recommend some very fine wire wool or some P1000 or higher silicone carbide sandpaper both of which can be picked up from your local hardware shop. Please make sure the lamp is disconnected from the mains before cleaning. Please do notclean the copper effect lamp holder as its painted!
